Features and Functions

• Equivalent to  60W incandencent bulb
• Consumes only 9W of power
• Connect to your Control or Pulse system via Z-Wave to turn the bulb On/Off and control brightness
• Within the Control or Pulse app, create rules to turn the light on/off at set times, or when certain activity occurs, such as a door opening/closing or the system is armed/disarmed.

CONTROL

Control app

• Turn your light on or off from the Light icon on the dashboard
• To dim or brighten the light
  1. Tap the hamburger menu
  2. Tap Lights
  3. Use the slider to set the brightness

Control Portal

• To create a rule to control the status of the light, such as turn on when the front door is opened or there is an alarm at the home
  1. Log into the Control portal
  2. Click Automations
  3. Click Rule
  4. Click Add Rule
  5. Select Event-triggered Rule
  6. Select the criteria for the rule, then click Save

• To create a schedule to set the status of the light at specified times, such as turn on at sunset, or turn off at a certain time of day
  1. Log into the Control portal
  2. Click Automations
  3. Click Schedules
  4. Click Add a Schedule
  5. Select the criteria for the schedule, then click Save

PULSE

Pulse app

1. Tap the Light tile on the dashboard, or tap the hamburger menu, then tap Lights and Switches
2. Tap to turn the light on/off, or use the slider to dim

Pulse Portal

• Quick Rules are a predetermined set of rules that can be turned on or off. To use Quick Rules to control your l.ight
  1. Log into the Pulse portal
  2. Click on Rules
  3. Click on Quick Rules
  4. Locate the desired rule and click the On/Off button to turn the rule on or off
     
     
• Automations can be used to create your own rules, to turn the light on/off at certain times, or when certain events occur
  1. Log into the Pulse portal
  2. Click on Rules
  3. Click on Automations
  4. Click on Add Automation
  5. Select the criteria for the automation, then click Save

Installation and Setup

Congratulations on your new Jasco Smart LED Bulb

Follow the instructions below to install your lightbulb, and link it to your Control or Pulse accoount.

1. Turn off the power to the light bulb socket where installation will occur.
2. Remove the existing bulb, if any.
3. Screw the smart LED bulb into the socket.
4. Add the device to your Z-Wave network. Follow the instructions below for your ADT system

Control

1. Open your Control app
2. Tap the hamburger menu on the upper left
3. Tap Add Device
4. Tap Lighting and Appliance Control
5. Tap Jasco Enbrighten Smart LED Bulb
6. Follow the on-screen prompts to link your device

Pulse

1. Open your Pulse app
2. Tap the Manage Devices tile. If you do not see the tile, tap the hamburger menu in the upper left. Tap Settings, the tap Manage Devices.
3. Tap Add
4. Follow the on-screen prompts to link your device

Troubleshooting

Download the manufacturer's manual